MIL-STD-2106A(SH) APPENDIX B
TEST TITLE: TEST NO: REV/CHG:
GENERAL INFORMATION
1. OBJECTIVE: [Briefly describe the test objective relative to capabilities and/or interfaces to be tested.]
2. ESTIMATED TESTING TIME:
[Enter the estimated elapsed (clock) time in hours required to perform the test, assuming no interruptions. Includes the time required to complete the INITIAL CONDITIONS AND SETUP and SHUTDOWN AND SECURING steps.]
3. REFERENCES:
[List the identifying number and title of reference sources used as a primary basis for preparation of the test outline and procedure.]
4. TEST OR SUPPORT EQUIPMENT AND MATERIAL:
GENERIC NAME QUANTITY IDENTIFYING INFORMATION [List all portable, non-installed test or support equipment and material including special tools, handling equipment,
measurement devices, shapes, etc., required to conduct the test. Common tools should not be listed. Standard shipboard test equipment as defined in NAVSEA ST000-AA-IDX-010-PEETE should be used wherever possible.]
[List electrical and electronic test equipment by generic name including the subcategory (SCAT) code under IDENTIFYING INFORMATION. If test equipment does not have SCAT code, list the manufacturer and model number, drawing number, or other identifying information. For nonelectrical and electronic test equipment, list by generic name and provide salient characteristic in IDENTIFYING INFORMATION column or manufacturer's part number and Federal Supply Code for Manufacturer (FSCM) as listed in Cataloging Handbook H4. Special tools and materials will be identified by name, manufacturer's part number, and FSCM.]
5. COMPUTER PROGRAMS REQUIRED:
[List all computer programs required in the conduct of the test and identify all test data media (tapes, CDs, etc.). The level of detail to which computer programs are specified will vary depending on requirements. In some cases the version number, installed patches, and date may be required. However, it is advisable to specify computer programs without versions if not absolutely required. Specifying specific program version numbers will cause test procedures to be out of date if/when program versions are updated/changed (i.e., SSDS MK2 MOD 2 Operational Program vice SSD MK 2 MOD 2 OP Program version 5.04.07).]
Note: In all cases, software provided for testing purposes only must be removed before the ship is delivered. Upon ship delivery, all installed software must be as certified and approved for use in accordance with the
NAVSEAINST 9410 series.
6. PREREQUISITES:
[List, by test number and title, the immediate prerequisite test(s) that must be completed prior to the conduct of this test. Do not require a complete test if only a portion of that test is required. In such cases, prerequisite functions should be called out by listing the specific steps in the prerequisite test procedure.]
FIGURE B-6. General information format and content (sheet 1 of 2).
35
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business